G-Code, or preparatory code or function, are functions in the Numerical control programming language. The G-codes are the codes that position the tool and do the actual work, as opposed to M-codes, that manages the machine; T for tool-related codes. S and F are tool-Speed and tool-Feed, and finally D-codes for tool compensation.
The programming language of Numerical Control (NC) is sometimes informally called G-code. But in actuality, G-codes are only a part of the NC-programming language that controls NC and CNC machine tools. The term Numerical Control was coined at the MIT Servomechanisms Laboratory, and several versions of NC were and are still developed independently by CNC-machine manufacturers. The main standardized version used in the United States was settled by the Electronic Industries Alliance in the early 1960s. A final revision was approved in February 1980 as RS274D. In Europe, the ISO standard DIN 66025 is often used instead.
Due to the lack of further development, the immense variety of machine tool configurations, and little demand for interoperability, few machine tool controllers (CNCs) adhere to this standard. Extensions and variations have been added independently by manufacturers, and operators of a specific controller must be aware of differences of each manufacturers' product. When initially introduced, CAM systems were limited in the configurations of tools supported.
Today, the main manufacturers of CNC control systems are GE Fanuc Automation (joint venture of General Electric and Fanuc), Siemens,Mitsubishi, and Heidenhain, but there still exist many smaller and/or older controller systems.
Some CNC machine manufacturers attempted to overcome compatibility difficulties by standardizing on a machine tool controller built by Fanuc. Unfortunately, Fanuc does not remain consistent with RS-274 or its own previous versions, and has been slow at adding new features, as well as exploiting increases in computing power. For example, they changed G70/G71 to G20/G21; they used parentheses for comments which caused difficulty when they introduced mathematical calculations so they use square parentheses for macro calculations; they now have nano technology recently in 32-bit mode but in the Fanuc 15MB control they introduced HPCC (high-precision contour control) which uses a 64-bit RISC (reduced instruction set computer) processor and this now has a 500 block buffer for look-ahead for correct shape contouring and surfacing of small block programs and 5-axis continuous machining.
This is also used for NURBS to be able to work closely with industrial designers and the systems that are used to design flowing surfaces. The NURBS has its origins from the ship building industry and is described by using a knot and a weight as for bending steamed wooden planks and beams.
The programming language of Numerical Control (NC) is sometimes informally called G-code. But in actuality, G-codes are only a part of the NC-programming language that controls NC and CNC machine tools. The term Numerical Control was coined at the MIT Servomechanisms Laboratory, and several versions of NC were and are still developed independently by CNC-machine manufacturers. The main standardized version used in the United States was settled by the Electronic Industries Alliance in the early 1960s. A final revision was approved in February 1980 as RS274D. In Europe, the ISO standard DIN 66025 is often used instead.
Due to the lack of further development, the immense variety of machine tool configurations, and little demand for interoperability, few machine tool controllers (CNCs) adhere to this standard. Extensions and variations have been added independently by manufacturers, and operators of a specific controller must be aware of differences of each manufacturers' product. When initially introduced, CAM systems were limited in the configurations of tools supported.
Today, the main manufacturers of CNC control systems are GE Fanuc Automation (joint venture of General Electric and Fanuc), Siemens,Mitsubishi, and Heidenhain, but there still exist many smaller and/or older controller systems.
Some CNC machine manufacturers attempted to overcome compatibility difficulties by standardizing on a machine tool controller built by Fanuc. Unfortunately, Fanuc does not remain consistent with RS-274 or its own previous versions, and has been slow at adding new features, as well as exploiting increases in computing power. For example, they changed G70/G71 to G20/G21; they used parentheses for comments which caused difficulty when they introduced mathematical calculations so they use square parentheses for macro calculations; they now have nano technology recently in 32-bit mode but in the Fanuc 15MB control they introduced HPCC (high-precision contour control) which uses a 64-bit RISC (reduced instruction set computer) processor and this now has a 500 block buffer for look-ahead for correct shape contouring and surfacing of small block programs and 5-axis continuous machining.
This is also used for NURBS to be able to work closely with industrial designers and the systems that are used to design flowing surfaces. The NURBS has its origins from the ship building industry and is described by using a knot and a weight as for bending steamed wooden planks and beams.
0 comments:
Post a Comment